Kitchen Accessories Glass Shelves

All our prices include VAT and Delivery
Items marked PAO cannot be purchased on their own

Alaris > Kitchen Accessories > Kitchen Accessories Glass Shelves

Glass Shelves - FG

Made from 8mm toughened glass, these glass shelves are polished on all edges and feature a 1 x 1mm bevel on the top edge of all sides. Available in a frosted finish and a clear finish.
Sizes - 200 x 480 x 8mm, 200 x 580 x 8mm, 200 x 780 x 8mm, 200 x 880

Size

Radiussed Glass Shelves

Made from 8mm toughened glass with radiussed (61mm) corners. Available in frosted or clear options. Polished on all sides featuring a 1 x 1mm bevel on the top edge of all sides. Available in various sizes.

Size

Finish

Decorative Glass Shelf Supports Pair - DGSS PAO

Can only be purchased along with glass shelves not available on their own
Glass shelf supports. Suitable for use in both kitchen or bathroom environments. These unobtrusive supportsa re available in an aluminium finish for fixing to a panel (19-22mm) or directly into a wall. Suitable for use with glass shelves of 8mm thickness.

Price: £16.00

Type

Adjustable Shelf Supports Pair - CGSS PAO

Can only be purchased along with glass shelves not available on their own
High quality adjustable shelf supports in a matt nickel or chrome finish.

Finish

Skyline Floating Shelves - KSL

A set of 25mm diameter steel tubes and a glass shelf which is fitted by suspending the steel tubes vertically from the ceiling then securing the shelf onto the tubes. Includes fixing kit, tubes and shelf. Note: Not suitable for fitting to a plasterboard ceiling unless it is to a timber joist or baton.

Shelf is 1000 x 400 x 6mm toughened glass
Steel tubes : 1000 x 25mm (can be cut to any length)

Glass Choice

Tableline Glass Shelves - TCG

Glass shelves suitable for use with tableline system. Made from 12mm toughened glass. Available in a clear finish, 50mm radiused corners and polished edges. Use with glue fix tableline bar supports and adhesive.

Size

Tableline Breakfast Bar supports - KBS

Tableline Bar supports - KBS
Designer table bar supports in a choice of finishes and designs. The supports are available in straight or angled versions with options to screw fix to a timber or laminate worktop or glue fix to a glass surface. The bottom fixing of the leg is screw fix. 50mm diameter, 200mm high.
Maximum distance between supports is 600mm.
Maximum load capacity is 15kg per leg.
Angled tube has a 20 degree tilt.
Overhang from the centre of the support to the edge of the upper worktop should be a maximum of 200mm.

Gluefix

Adhesive kit PAO

Cannot be purchased on own must be bought along with supports.
Adhesive kit (50ml) for Tableline Bar supports.

Price: £19.00